New process Meter fit FLUKE F787 loop calibrator T-RMS
Only US$ 299, -New process Meter fit FLUKE F787 loop calibrator T-RMS - from iboxall with free shipping now.
http://www.iboxall.com/new-process-meter-fit-fluke-f787-loop-calibrator-t-rmsThe H787 ProcessMeter = loop calibrator + T-RMS DMM compared with FLUKE F787
Manual/auto range max/min value data hold diode backlight 12-32 V current output to the loop
Brand new with 3 ys ＵＳＡ warranty
The H787 ProcessMeter complies with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No.1010.1-92. It is rated 1000 V Overvoltage Category Ⅲ.
http://www.iboxall.com/new-process-meter-fit-fluke-f787-loop-calibrator-t-rms
The H787 Process Meter was the first tool to combine a loop calibrator with a fully-functional 1000V True RMS digital multimeter to give process technicians double the power in one tool.
A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke 787 Process Meter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. the H787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution.
Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you're tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power - the H787 ProcessMeter.
Function Highlight:
Besides regular measurement functions, the ProcessMeter has other special functions, which described as follows:
1. True Root Mean Square (TRUE RMS) measurement.
All measured value of AC voltage and AC current of this instrument are TRUE RMS, which is differential from low-end instruments that only measure the AC averages.
2. Manual/Auto Range
3. Percentage Range
4. Relative Value Measuring
6. Data Hold
7. Low power Detection
8. Backlight Control
9. This ProcessMeter can deliver steady, phase stepped or linear increasing current output to the loop with current 0-20 mA and/or 4-20 mA. It has three work models:
Current source model: enable the ProcessMeter to provide current to transmitters or passive circuits without supplying from external loops.
Analog current model: enable the ProcessMeter to adjust the current on external power (12-32 V) in the loop, which emulates a 2-wire transmitter,SMD 0603 engineering sample capacitor kit 100 values x50 pcs in BOX-ALL NPO 10UF.
Loop power model: enable the ProcessMeter to provide external equipments power and measure the loop current
Range and Accuracy
The accuracy of Ranges listed below are ensured under circumstances that the instrument under normal use within one year after calibration, and the basic condition is: work temperature 18℃-28℃,New MS6818 Wire Cable Tracker Metal Pipe Locator Detector Tester AC/DC 12~400V, relative humidity lower than 80%. The representation of accuracy is: ± (reading value *% + lower order figures)
Not Specified
Not Specified
Note: above accuracies are ensured within 10％—100％ of the full range.
Input impedance 10MΩ (standard), <100pF, AC coupling.
AC/DC conversion refers to RMS conversion.
Overvoltage Protection: 700V.
DC Voltage
±(0.03% +5)
Note: above accuracies are ensured within the full range.
Input Impedance 10MΩ (standard), <100pF.
Overvoltage Protection: 1000V.
